Designed for crossing rivers in their middle or upper reaches
This model is ideal for crossing rivers in their middle section or in the upper section in the valley area. The materials are lightweight and there is no need for auxiliary suspension systems, except in the case of high lengths, where it is necessary to add pillars.
Perfect for pedestrians and cyclists
This model has no length limitations and allows platform widths between 1.5 and 2 m wide. It is deal for pedestrians and bicycles.
The pillars are 1.5 m high and transmit the load to the ground through micropiles. The suspension hangers are made in stainless and the board is wooden made.
It is ideal for including it within the route of a footpath or a family route.
This footbridge aims to open a pass over a ravine or a small river and has a length limited to 15m and a maximum width of 1m. It is an ideal pedestrian bridge to include within the route of a path or a family route.
It adds a heritage and tourist value to the area where it is located.
This model increases the heritage value of the area, is very flexible and allows its redesign to find suitable aesthetics for each project. Calculated mainly for pedestrians, it also allows the passage of vehicles limiting their access.
It has no length limitations
With no length limitations and a platform width from 2.5m to 4m, this bridge is ideal for urban or semi-urban areas.
It is designed for its installation in hard-to-reach areas with reduced budgets.
This model has been designed to be installed in areas of difficult access for the transport of materials such as canyons and ravines. The elements must be as light as possible so that their connection with the cables does not require external means of suspension.
It has no length limitations.
Its length being not limited a width between 1m and 1.5m is recommended for pedestrians and bicycles.
Designed for the habitual use of pedestrians and bicycles but calculated for the passage of vehicles.
Mainly for pedestrian use, this bridge allows punctual passage of vehicles. The Atlas Model is a high performance one, but hides its robustness in a design of simple lines that give a slim air to the whole.
It increases the architectural and heritage value of the area where it is located.
This model has no length limitations and allows widths from 2.5m to 4m. The Atlas Model requires a thorough study of the area and its possibilities, and is ideal for the replacement of existing bridges of similar characteristics when these are very deteriorated and impossible to be restored.
If you are part of a company interested in collaborating with us, click here.
Els diferents models són un punt de partida per solucionar les necessitats de cada projecte.Tots ells compleixen els eurocodis i són adaptables a les obligacions i necessitats normatives de cada país.
From an idea to a bridge
Bridges or hanging walkways are light infrastructures that offer new communication routes for pedestrians and bicycles thus adding a singular tourist value to the area. Designed for environmental integration, they are ideal solutions for crossing rivers and ravines as well as for overcoming orographic depressions.
iMuntanya has a multidisciplinary team of engineers and technicians to calculate and devise a custom project based on our own models or in collaboration with other companies, also taking into account which will be the optimal installation system according to the location of the footbridge.
With the commissioning of a new project, in our technical department we carry out an executive design of the elements, analyze the options of connection and transmission of the loads from the main cable to the ground, we look for the best connections of the main cable with the platform and the suspension hangers and, finally, we work with care the aesthetics aspects of the bridge so that it results in a structure that integrates and adds beauty to the space where it is located.
With the approval of the design, in our workshop we prepare the structure and manufacture the components of the suspended bridge. From the catalogued parts to the special production of project parts, we are able to produce and assemble all gateway components in accordance with current EU regulations and the regulations of the country where it is installed. In iMuntanya we are experts in cable and we work with all the existing range in the market. We know this material, its properties and the ideal typology to get the best performance according to the needs of the project.
Finally, we install the bridge with our own equipment or we supply all the necessary components to installation companies such as cable-pendulum and pendulum-structure junction clamps and rigid or flexible steel pendulum.
Windsor Suspension Bridge, Gibraltar, UK
Ruta de los Molinos, Lucena del Cid
Pont de Sanavastre, Isòvol
La Ribère, FR
Pantà de Can Borrell, Parc Natural de Collserola
Parc Nacional d'Aigüestortes i Estany de San Maurici
Cirq du Gavarnie, FR
Sant Esteve de Palautordera
Pont de la Sarre, Luz Saint-Sauveur, FR
Barrada Gedre, FR
Salardú, Vall d'Arán
In iMuntanya we offer two options for the installation of suspended footbridges: by our team, trained and approved according to the standards in force, or by an external company with the work supervision by iMuntanya for its proper assembly.
We have specially adapted machinery for drilling and ground injection as well as the necessary tools and techniques for the assembly of the suspension bridge. Our team has extensive experience, knows the welding techniques and the proper handling of wood and concrete. In addition, it is homologated in the techniques of vertical works and works in confined spaces and certified at European level in the matter of labour risks prevention.
We have a long experience in areas of difficult orography and can guarantee the highest level in the execution of infrastructures.
External installation with iMuntanya supervision
Under the supervision and direction of an iMuntanya construction manager, the assembly of the suspended bridge may be carried out by an external company that has the appropriate equipment and certifies the knowledge and skills of its operators in vertical working techniques and labour risks prevention.
All walkways are delivered with a manual for proper installation.